Palintest multiparameter photometers enable the dilution factor to be entered during the test using the instrument keys. The instrument will then calculate the final answer using this factor, and the multiplication step will no longer be required.
Using Kemio, you can add a dilution factor to a label when performing a test. If a label with a dilution factor is used during the test, the factor will have applied to the number shown on the screen. For example, if a 50mg/L solution was diluted 5x and measured by Kemio using a label with a 5x dilution factor, the result displayed on the screen will be 50mg/L.
27th July 2021
Lightweight and handheld, our new Lumiso photometers are designed for complete portability to perform testing, anywhere. Our new digital photometer is built on the same reliable Palintest technology, but now with new and improved features.
12th July 2021
Our latest Halma campaign is one that is very close to our hearts at Palintest. Joining forces with WaterAid, the Water for Life campaign which spans over two years aims to help tackle the global issue of water accessibility and quality.