Once the test has been carried out on the diluted sample, the test result must be multiplied by the dilution factor used.
For example: If the dilution tube was originally filled to the x5 mark, then the test kit result should be multiplied by 5 to give the concentration in the original sample.
15th June 2021
Improve the accuracy of your results and remove the need for titrations in high concentration PAA applications such as aseptic fill and bottle rinsing with our brand new peracetic acid sensor.
10th May 2021
Read our case study on ALZ Agro who use Kemio™ to monitor disinfection in fresh produce wash water.