Turbidity made clear

Turbidity is a fundamental water safety test, as high turbidity levels can be a signal for a number of quality issues. In this article, we look at what turbidity is, what it is caused by, and how it can be measured. 

What is Turbidity?

Water almost always contains suspended solids, consisting of particles of varying sizes and properties, which are usually invisible to the naked eye. Many of these particles settle on standing. It is the particles which do not settle, termed colloidal solids, which cause the water to look turbid.

 

What Causes Turbidity?

Turbidity of water is mainly caused by the presence of clay, soils, organic matter and micro-organisms, often from the run-off from industry, agriculture and domestic sources.

Measuring Turbidity

The measurement of turbidity is a key test of water quality, as higher turbidity levels can be an indicator for a number of issues. Turbidity is an optical measurement of the water and therefore does not identify individual substances. However, a correlation can be formulated between turbidity and TSS, this needs to be handled with care as the correlation varies between sites and processes.

There are various ways of expressing turbidity values but one of the most common is the nephelometric turbidity unit (NTU). The human eye is an excellent turbidity meter, capable of determining turbidity values as low as 4NTU. However, most UK water companies aim to reach a target of less than 1NTU at the drinking water treatment works, and no more than 4NTU from customer taps. Although turbidity in potable water can be due to harmless parameters such as excessive aeration and high calcium levels, higher turbidity values can represent a health risk.

To ensure that water is fit for purpose, the WHO has recommended that turbidity should be measured before and after each unit process at domestic and industrial water treatment facilities. This is because solids can compromise the efficiency of processes such as chlorination and UV disinfection. Chlorine used to ‘clean’ the water can be depleted by oxidising the solid material, reducing its effectiveness to eradicate the harmful micro-organisms. In addition, cloudiness in water will prevent adequate penetration of UV light, thereby affecting disinfection rates through UV treatment.

Palintest has a range of quick and simple methods for measuring turbidity including the Turbimeter Plus which you can get as part as a Turbidity Test Kit. If you would like any further information about turbidity or how to effectively measure it, please contact our team or visit our turbidity parameter page

    To contact our team please fill out the enquiry form below. Please note we aim to respond to all enquiries within 2 working days.

    Explore our content hub