Phosphorus is essential to life
and is described as a macronutrient. Phosphorus exists in water as the phosphate
Phosphates come from rocks, so
the sources are finite and non-renewable. Phosphorus is used in fertilizer and
so enters the ground and surface water through surface
How does phosphate enter your pool water?
There is a common misconception that phosphates are only introduced to a pool from rainfall. Although rainwater may affect your pool water as it contributes to surface run off, the biggest source of phosphates in pool water is the bather. Phosphates are found in many lotions, shampoos, and make up products, in addition to soil and leaves.
Phosphates are introduced to the water by any of the following:
- From rainfall, sprinkler systems or surface run-off washing into the pool
- From garden fertilizers being washed into the pool
- Wind blowing dirt, leaves, twigs back into the pool
- Addition of fresh water to the pool as mains water has some phosphate present
- The use of pool chemicals containing TSP in and around the pool
- Bathers with cosmetic products on their skin entering the pool
What does phosphate do to your pool water?
phosphate levels provide nutrients for algae to grow. When orthophosphate
levels (simplest form of phosphates which are consumed by algae) are too high,
algae will become resistant to disinfectants, even when shocking the pool, and
an algal bloom will occur.
The presence of high level of phosphates and hence algae will result in the following:
- Poor water chemistry
- Cloudy green water
- Green and mustard colour debris
- Slimy and slippery surfaces
- Excessive chemical use
What you can do to limit phosphates?
Phosphates are inevitably in your pool water, but you can do
the following things to limit the amount of phosphates:
- Remove leaves and other organic material from
the water as soon as possible
- Clean filters and pump baskets regularly
- Regularly vacuum bottom of the pool
- Be aware of using chemicals containing
phosphates in and around the pool
- Prevent drainage water from the surroundings from
entering the pool
These steps will ensure that you maintain low levels of phosphate. To keep algae bloom at bay, we suggest the following:
- Maintaining adequate disinfection levels
- Maintain adequate pH levels
- Regular phosphate testing
- Adequate filtration
- Routine backwashing
Palintest suggest that you aim to maintain your phosphate levels below 0.01 mg/L. When deciding your frequency of testing, remember to take the following into consideration:
- Bather load
- Outdoor or Indoor pool
- Source water levels of phosphate
The Palintest Solution
Regular testing for phosphates is key to ensuring your pool
is kept clean and blue. Phosphate testing can use either visual or digital
Our latest photometer the Pooltest 10 now has the additional
benefit of phosphate testing and covers all key pool water parameters, in an
accurate, quick and precise manner.
Phosphates are essential to life, as is a key component to
fertilizer, without this in the long run, we will result in food shortages.
However, phosphates in pool water can lead to a negative effect, as they
provide nutrients for algae growth. Resulting in your pool water turning green,
and either expensive chemical usage or draining of the pool. Regular testing of
phosphates is recommended, especially for outdoor pools, or areas high in
Please note we will only use your data for the purpose specified.
You can unsubscribe to our newsletter at any time by emailing email@example.com, or by clicking the unsubscribe link at the bottom of the email newsletter.